Model A Ford Engine Parts

MODEL A FORD
Engine Parts

ENGINE PAINT -- Specially formulated heat resistant engine paint. Comes in either a spray can or a one quart can which can be either brushed on or used in a spray.

M-200 Spray Can ea. 6.50

M-202 Pint Can ea. 12.50

ENGINE GASKET SET -- Set includes all gaskets needed for the engine including the copper head gasket.
Quality. U.S.A. made.

A-6008-C 1928-31 set 41.95

TIMING GEAR SIDE COVER GASKET -- Gasket fits on the side timing gear cover.

A-6018 1928-32 ea. .95

TIMING COVER BOLTS -- Dome head style bolts for front timing cover.

A-6019-MB 1928-31 set 3.50

FRONT TIMING COVER GASKET

B-6020 1928-34 ea. .95

TIMING PIN

B-6023 1928-34 ea. 3.25

FRONT MOTOR MOUNT SET -- Motor mount set includes: 3 springs, brass bushing, fiber washer & castle nut.

A-6031-S 1928-31 (8 pieces.) set 6.95

FRONT MOTOR YOKE

A-6030-A ea. 29.95

FRONT MOTOR MOUNT BRASS BUSHINGS

A-6034 1928-31 ea. 1.95

COPPER HEAD GASKET

A-6051-C 1928-31 ea. 24.95

CYLINDER HEAD NUT COVERS "CHROME" -- The chrome plated cylinder head nut covers to dress up your engine

compartment.

CNC-6062-AS 1928-48 (Set of 14) set 9.95

CYLINDER HEAD WASHERS -- Original style cadmium plated washer.

B-6063 1928-34 ea. .30

CYLINDER HEAD NUTS -- Set of 14 Original style cadmium plated head nuts.

A-6064-S 1928-34 set 5.20

HEAD STUD AND NUT SET -- Stud and nut set to bolt on the head.

A-6064-66 1928-32 (28 pieces.) set 22.95

CYLINDER HEAD STUDS - MADE IN U.S.A.

A-6066 3 1/2" ( l2 required) ea. 1.20

A-6067 5 23/32" ( 2 required) ea. 1.75

PISTONS - U.S.A. -- Superior quality pistons come complete with fitted pins and are the Lock type. (set of 4)

BB-6108-A Standard set 110.00

BB-6108-B .020 set 110.00

BB-6108-C .030 set 110.00

BB-6108-D .040 set 110.00

BB-6108-E .060 set 110.00

BB-6108-F .080 set 110.00

BB-6108-G .100 set 110.00

BB-6108-H .125 set 110.00

WRIST PIN BUSHING - One needed per rod, for the end lock wrist pin.

B-6207 1928-31 ea. 2.25

PISTON RINGS-U.S.A. -- New piston rings made in the U.S.A.

B-6149-A Standard set 38.95

B-6149-B .020 set 38.95

B-6149-C .030 set 38.95

B-6149-D .040 set 38.95

B-6149-E .060 set 38.95

B-6149-F .080 set 29.95

B-6149-G .100 set 38.95

B-6149-H .125 set 38.95

PISTON RING COMPRESSOR

X-6151 All Models ea. 6.95

CARBON SCRAPER

X-6.52 All Models ea. 4.95

PISTON PIN SETS - U.S.A. -- High quality pins for the end lock pistons.

B-6135-A Standard set 21.95

B-6135-B .003 set 21.95

B-6135-C .005 set 21.95

B-6135-D .010 set 21.95

ROD SHIM SET -- Laminated shims for the rods.

B-6220 1928-34 set 7.95

CAMSHAFT DOWEL PINS

B-6253 1928-31 pr. 3.20

FIBER TIMING GEAR -- The fiber timing gear that fits on the
camshaft. When replacing only the timing gear use an oversize.

B-6256-A 1928-34 Std. ea. 38.00

B-6256-B 1928-34 .003 ea. 38.00

B-6256-C 1928-34 .005 ea. 38.00

CAMSHAFT NUT -- A high quality camshaft nut.

B-6259 1928-34 ea. 5.95

CAMSHAFT THRUST PLUNGER -- Camshaft plunger and spring keeps the
tension between the camshaft and the timing cover.

B-6275/76-S 1928-34 ea. 3.95

CRANKSHAFT TIMING GEAR -- Steal crankshaft gear that drives the fiber gear.

B-6306 1928-34 ea. 14.95

A-6307 1928-31 Gear Key ea. 2.25

OIL SLINGER -- Oil slinger fits on front of crank shaft.

B-6310 1928-34 ea. 3.65

CRANKSHAFT PULLEY -- Quality cast steel pulley. The one piece is original type and the two piece is so you
can change the pulley without removing the radiator.

A-6312-A 1928-31 2 piece ea. 30.95

A-6312-B 1928-31 1 piece ea. 32.50

RATCHET NUT - MADE IN U.S.A. -- Special nut used to hold the pulley.

B-6319 1928-38 ea. 12.95

OIL DRAIN TUBE -- Cadmium rear main bearing oil drain tube.

A-6328-A 1928-29 5/16" ea. 3.50

A-6328-B 1930-31 ea. 4.25

REAR MAIN OIL SEAL -- Die cast seal fits in the block.

A-6335 1928-31 ea. 13.95

B-6335 1932-34 4W ea. 25.00

REAR MAIN OIL SEAL "NEOPRENE" -- Seal requires slight machining on the crankshaft to install.

A-6335-NP 1928-31 ea. 7.95

B-6335-NP 1932-34 B&C ea. 8.95

MAIN BEARING SHIM SET -- Two laminated shims are needed for the rear main and four for the center and the
front main bearings.

A-6340/46 1928-31 set 7.95

B-6340-5 1932-34 set 8.95

REAR MAIN BEARING BOLT

B-6344 1928-32 ea. 2.75

FLYWHEEL BOLT SET -- The special bolt with a hole in the head for a safety wire lock.

B-6376 1928-48 set 7.00

FLYWHEEL HOUSING TO BLOCK BOLTS -- 4 bolts with drilled heads & 2 bolts with Lock washers for the throttle linkage.

A-6378-MB 1928-31 set 4.50

CLUTCH HOUSING TO FLYWHEEL HOUSING BOLTS -- Set of 11 bolts and lock washers.

B-6380-MB 1928-31 set 4.50

FLYWHEEL RING GEAR -- A heavy duty reproduction ready to install.

A-6384 1928-48 ea. 31.95

FLYWHEEL HOUSING GASKET

B-6396 1928-34 ea. 1.50

FLYWHEEL DOWEL PIN

B-6397 1928-34 ea. .75

FLYWHEEL HOUSING DUST COVER BOLTS

B-6398-MB 1928-31 set of 3 set 1.00

FLYWHEEL SHIM -- Shim between the flywheel housing and block.

B-6400 1928-34 pr. 1.00

ADJUSTABLE TAPPETS -- These are the adjustable nut lock style.

B-6500-M 1928-34 set 72.00

VALVE GUIDE TOOL -- Special tool used to remove the valve guides.

X-6500-RT 1928-34 ea. 8.95

INTAKE AND EXHAUST VALVES -- High quality U.S.A. made valves for longer life.

B-6505-SS 1928-34 Stainless Steel ea. 12.95

VALVE GUIDES -- High quality split style valve guide.

B-6510 1928-34 pr. 8.50

VALVE SPRINGS -- New springs ready to be installed.

B-6513 1932-34 ea. 1.10

VALVE SPRING KEEPER -- Steel keeper for the valve springs.

B-6514 1932--34 4 cyl. ea. 1.95

VALVE COVER GASKET -- Fix those oil leaks and replace that old
gasket with a brand new one.

A-6521 1928-31 ea. 1.50

B-6521 -B 1932-34 ea. 7.95

OIL PUMP DRIVE GEAR -- A high quality U.S.A. drive gear.

B-6551 ea. 29.95

OIL PUMP DRIVE GEAR SLEEVE

B-6561 1932-34 ea. 4.50

DISTRIBUTOR DRIVE SPRING

B-6570 1928-34 ea. 1.50

OIL PUMP REPAIR KIT -- The repair kit includes all of the parts
needed to rebuild the oil pump.

A-6600-RK 1932-34 kit 29.95

OIL PUMP SPRING RETAINING PLATE -- Holds oil pump spring to the pump.

A-6618 1928-34 ea . 1.75

OIL PUMP RETAINER SPRING -- Spring fits on bottom of oil pump.

A-6620 1932-34 ea. 1.25

OIL PUMP SCREEN GASKET

B-6626 1928-34 ea. .75

OIL RETURN PIPE GASKETS -- Hard fiber that will swell tight with use.

A-6648 1928-31 set 2.00

OIL PIPE MOUNTING BOLT SET -- Includes the special copper washers.

A-6648-MB 1928-31 set 1.75

OIL PAN & VALVE COVER BOLTS -- Set of 30 black oxide finish bolts.

A-6676/6520 1928-31 set 5.00

PACKING -- Timing gear front cover plate packing.

A-6700 1928-31 ea. 2.25

OIL PAN DRAIN PLUG

B-673O 1932-38 ea. 2.25

COPPER DRAIN PLUG GASKET

B-6734 1932-38 ea. .65

B6734-C 1932-38 Copper ea. .95

OIL DIP STICK -- Original style cadmium plated dip stick.

B-6750 1932 4 cyl ea. 2.95

OIL FILLER TUBE WITH BAFFLES -- Brand new tube and baffle ready to install.

A-6763 1928-31 ea. 12.95

OIL FILLER CAP -- Brand new authentic style oil cap.

A-6766-A 1928-31 Cadmium ea. 4.95

A-6766-C 1928-31 Chrome ea. 6.95

ENGINE PANS -- Stamped steel original style engine pans.

A-6775/76-S 1928-31 pr. 49.95

ENGINE PAN MOUNTING SET

A-6775-MB 1928-31 (18 pieces.) set 2.95

OIL PAN GASKET SET

A-6781 1928-31 set 6.50

B-6781 1932-34 4 cyl set 14.95